Qualatex Sempertex
It is currently Fri Oct 31, 2014 9:33 pm

All times are UTC [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Basic Rabbit Tutorial (5)
PostPosted: Wed Jan 28, 2009 1:57 pm 
Offline
User avatar

Joined: Tue Mar 18, 2008 3:02 pm
Posts: 14544
Images: 115
Inflate a Sempertex 260 modelling balloon so that you have a 6/7 finger un-inflated tail.

You start by twisting a 3 finger nose bubble followed by a 1 finger pinch twist.

The next bubble will be one side of the top of the head where later you can draw the eye onto, this twist should be 3 fingers followed by another 1 finger pinch twist which will help to push the ears forward so improving the look of your bunny.

A pinch twist or ear twist are the same and instructions can be found here for them;
viewtopic.php?f=25&t=1107


Attachments:
bunny1.jpg
bunny1.jpg [ 53.09 KiB | Viewed 40651 times ]

_________________
"Lets Improve Our Art"
Balloon Excellence 2012 Award Winner
For Services to the Balloon Community.
http://www.qualatexballoons.co.uk
http://www.sempertexballoons.co.uk
Top
  Profile WWW  
 
 Post subject: Re: Basic Rabbit Tutorial
PostPosted: Wed Jan 28, 2009 2:00 pm 
Offline
User avatar

Joined: Tue Mar 18, 2008 3:02 pm
Posts: 14544
Images: 115
The ears are two 4 finger bubbles twisted into the pinch twist, from this pinch twist you will need another 3 finger bubble for the other side of the top of the head and twist into the first pinch twist that you made behind the nose.

You then need a soft 4 finger fold twist for a cheek.
(to get a soft bubble squeeze some of the air along into the tail of the balloon, but not too much)

A fold twist, loop twist are again exactly the same twist, instructions are here;
viewtopic.php?f=25&t=1091


Attachments:
Bunny2.jpg
Bunny2.jpg [ 63.8 KiB | Viewed 40646 times ]

_________________
"Lets Improve Our Art"
Balloon Excellence 2012 Award Winner
For Services to the Balloon Community.
http://www.qualatexballoons.co.uk
http://www.sempertexballoons.co.uk


Last edited by Graham Lee on Wed Jan 28, 2009 2:07 pm, edited 2 times in total.
Top
  Profile WWW  
 
 Post subject: Re: Basic Rabbit Tutorial
PostPosted: Wed Jan 28, 2009 2:04 pm 
Offline
User avatar

Joined: Tue Mar 18, 2008 3:02 pm
Posts: 14544
Images: 115
Repeat another 4 finger bubble for the other cheek and twist into the same pinch twist

Twist a very small 1 finger bubble for the neck.

The rest of the balloon has to be divided into five sections. These will vary with everyone depending on the pressure you’ve put onto the balloon while twisting but your looking for the next four bubbles to be approx 3 fingers each in length for the bunny’s arms and legs, these are wrapped around the bottom of the neck bubble.

Now we’re looking for 5 finger length to be left on the balloon so that the body of the balloon can be 4 fingers in length with a 1 finger bubble for the tail. The tail bubble is twisted between bubbles 2 and 3 that were used for the arms and legs.

"TOP TIPS"
If you run out of balloon when making the bunny, with your next attempt put slightly less air into the ballloon.
Another trick is to run your hand firmly all the way down the length of the balloon when it's inflated which will stretch the balloon making it a few inches longer.
To get a bend onto the ears, rub your hand over the back of the ears to warm the balloon while also separating the ears and pulling the top of the ears down towards the pinch twist that holds the ears in place. You get a slight separation between the two ears and a slight curve forward.


Attachments:
Bunny-3.jpg
Bunny-3.jpg [ 80.55 KiB | Viewed 40645 times ]

_________________
"Lets Improve Our Art"
Balloon Excellence 2012 Award Winner
For Services to the Balloon Community.
http://www.qualatexballoons.co.uk
http://www.sempertexballoons.co.uk


Last edited by Graham Lee on Thu Mar 12, 2009 1:04 am, edited 2 times in total.
Top
  Profile WWW  
 
 Post subject: Re: Basic Rabbit Tutorial
PostPosted: Wed Jan 28, 2009 4:18 pm 
Offline

Joined: Fri Apr 11, 2008 10:49 pm
Posts: 1630
Location: England
very nice instructions Graham.

_________________
http://www.smudgyclown.co.uk


Top
  Profile WWW  
 
 Post subject: Re: Basic Rabbit Tutorial (5)
PostPosted: Fri Jan 30, 2009 11:16 pm 
Offline
User avatar

Joined: Sat Mar 29, 2008 9:08 pm
Posts: 326
Location: Netherland
Hi Graham,

Nadine tested your instructions yesterday.
She only used the pictures, becourse she can't read English and I didn't want to help her.
(In that way I could find out what a "newbe" would make of the instructions.

She found them very clear. That is, untill she came to picture 2. She didn't understand how to come from step 2 to step 3. So I had to show her. Then step 4 was not easy at all, becourse there is suddenly a new twisted bubbel....In the other steps you showd the bubble first and then you twisted it in the right place.
After she saw how that has to be done she made the rabbit quickly following the other steps.

It's not as nice as yours,...but I think she did a great job!
I must say,....mine popped like 10 times and she had to do it over just 1 time. Becourse she had the bubbles to big, we attached a second ballon to finish.
These are the bunny's we made:

Attachment:
konijntjes.jpg
konijntjes.jpg [ 76.22 KiB | Viewed 40445 times ]


Petra


Top
  Profile  
 
 Post subject: Re: Basic Rabbit Tutorial (5)
PostPosted: Sun Aug 11, 2013 1:32 am 
Offline

Joined: Sat Aug 10, 2013 7:33 pm
Posts: 10
that is nice


Top
  Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
SubLite Theme By Echo -=Designs By Echo=- © 2007-2008 Echo
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group


phpBB SEO