Balloon Chat
Uncategorized Boards => Competitions => Topic started by: Graham Lee on May 13, 2008, 01:21:23 PM
So shall we start another game?
Any Idea's or shall we just do the ABC game again?
Graham Lee
It might be difficult but if someone posts a model then the next model should start with the last letter of the previous model ?
Right here's the first picture;
Hand, so we need something posted with D
Graham Lee
Duck Duo
Made with one continuous yellow 260 and one blue 260 + an orange scrap.
O for Octopus
S for stork and baby
Sorry about the pic quality, could seem to get it right size for here!
Kitty
Yo ho ho Father ChristmaS
Scooter
RudolpH
HarP get in there
Nice harp!
Pugsy BeaR
RoboT
Tweey PiE
ElephanT courtesy of Thelma :)
T t tigerrrrR
thanks Twistina :D
Ian
RabbiT
Thelma, That is a lovely rabbit :D
Graham Lee
Tommy Gun
This was made a while ago, I do have what I think is a better version now;
Thank you Graham. The ears are done by stuffing a folded 160 into a 350. I like stuffing things.
Quote from: "Thelma Levett"I like stuffing things.
OOOOeeerrrrrrrr :oops:
Were looking for something to be posted with N
NesT
This is one of the models on my forthcoming Birds CD. Dig dig.
So Thelma do you have details of where people can buy your CD from ;)
Graham Lee
TiarA
AutomobilE
I am still working on it. I put it aside to do the "Two and a Bit" cd. Any enquiries can be made to me by email at
smudgyclown-inflated@yahoo.co.uk for that cd and I will let you know when the other is done. The Birds cd will have up to three versions of each bird. Easy, intermediate and advanced. It should be a bumper cd. First I need to sort out my web site. I hope you don't think I am using your excellent site as an excuse to promote myself but I would be silly not to mention it. Thank you for allowing me let people know.
Enterprise
Eggs
Squid
Duck on a scooter
Racing CaR
Rockets
Shark HaT
TanK
Nice Tank
Kicking
GirL
League cuP
Puppies
Scooter HaT
Tape measurE
I like the tape measure :D :lol:
Graham Lee
Me too!
RaT
Like the rat, but how do you get RaT from Tape measurE,
Ha ha
you wave a piece of cheese round the tape measure and the rat pops out of course :roll: :lol: :lol:
Duh!!!! Ok its an Excited Rat?????? Thelma puts the dunce's hat on. I was tired.
Nice rat Thelma,
I have always wondered how to make a practical version of one.
I will try yours thanks! ;)
Daniel M
Tiny turtlE
Entertaining with a guitaR
This is Caroline (Bubblz the Clown) entertaining the few of us that got together for a jam a little while ago.
Reindeer
Rocking Horse
Not as exotic and complicated as the last few posts but then I am not up to that level :( :oops: yet ;) :D
turtle hat...............thanks Don C.............. love his work!![attachment=0:180d0bfj][/attachment]turtle2 (Custom).JPG[/attachment:180d0bfj]
Billy
How do we get from Rocking horse
with the E to Turtle :lol:
Mind you it's a well made turtle hat :D
Graham Lee
okay, should of read how the game worked 1st!!! :?
how about this elephant hat.......another one of dons masks
[attachment=0:1sxlltd4][/attachment]elephnat mask (Custom).JPG[/attachment:1sxlltd4]
Tiger and Friend
H*lls, bells ............. I just looked at this thread. There's no hope at all for me. I'm miles (no, light years) away from the complexity of this stuff.
Congrats to all - but the posters do read like 'who's who' of balloon modellers :lol:
Dave
little dog
[attachment=0:3fxhrlvv][/attachment]blue dog (Custom).JPG[/attachment:3fxhrlvv]
Quote from: "daveandrews"H*lls, bells ............. I just looked at this thread. There's no hope at all for me. I'm miles (no, light years) away from the complexity of this stuff.
Congrats to all - but the posters do read like 'who's who' of balloon modellers :lol:
Dave
Dave look again, I am in there with some posts and I am by no means an expert. I am in awe of what else is made but the idea of this thread and the forum (as I undestand it) is to help everyone improve. Have a go, anything made well is good. If you don't try you can't improve and if there are mistakes then help is at hand as I have found out. Btw I had a peek at your website and your stuff looks good :)
I'm in total agreement with Professor T Wist and would encourage everyone to post no matter what level you are at.
The more twisting you do the better you will become, you never end up making it wrong as you've just found another way that it wont work, think positive :D
I wont tell you how many times I've come up with something due to trying something else that went wrong. The motorbike on this thread is an example; http://www.balloonchat.co.uk/viewtopic. ... &sk=t&sd=a (http://www.balloonchat.co.uk/viewtopic.php?f=22&t=266&st=0&sk=t&sd=a)
On Balloon Chat we want to encourage everyone at all levels to take part & participate, this is very important to me & hopefully others.
Graham Lee
I'm a complete novice compared to some of the people on here but I've :D posted a couple and lived to tell the tale
I'm concerned that people are worrying about what to post, please dont.
We encourage everyone to join in no matter at what level of twisting you are at.
A one balloonGiraffe made from a 260.
Elephant
Turkey
To get us out of trouble;
Yellow Flower
a RoseE
at least that's what the instructions said it would be :D I'm not so sure
Eye up!!!!
Peas in a poD
Donald DucK
(//http://i281.photobucket.com/albums/kk213/milesmoremagic/DonaldDuck.jpg)
Great it's still good to put my KoalA (again)
Aeroplane
which was shown by Roger at the Mildenhall care & share day
Elmer Fudd
(I know. I used the wrong color of balloons. :lol: )
Bonnie,
That's very nice. I like the way you've constructed & built up the face.
Very nice immediately thought Smurf in that colour or with a change of art work the gene from Aladdin.
That's great! I love it - how is it made?
Duck
Hi Bonnie,
Thelma & I are sitting here together playing around with our latex & looking at your Elmer Fudd & wondering is the head made from a 660 or a round balloon?
We both have different views on the construction & have a small wager on the outcome.
looks like possibly a 646 to me Graham!!???
Im with Billywiz on this one, i wouldve used a 646 to get the forehead.
Although im open to learn if another method was used. :D
Pete
I hope however bet that I used a round didn't bet a lot. :lol:
Happy twisting,
Bonnie, The Balloon Lady
Bonnie & all
This is what I came up with while playing at the Darlington day, a variation on the Elmer Fudd head.
I think it looks a bit like Dec (is that the right one)
i like this one graham is it a 350 on top or you got some 646s?
The cheeks & bottom jaw are a 160 & the top of the forehead is a 360 :D
Not sure what a 350 or 646 are :lol:
So to continue this game were looking for something beginning with a K
Kissing Fish
HorseS[attachment=0:1i5mno6f][/attachment]my_pony1vsm.JPG[/attachment:1i5mno6f]
Kath, I love your fish, so simple but effective. I think it's the drawing that helps make them as well.
SharK