For the first couple of times you may want to pre-stretch the 260 black to make it
3/4 fingers longer in length. Hols the balloon between your finger and thumb
and with your other hand pull the balloon up and through your finger and thumb.

Inflate the black 260 leaving a 7 finger un-inflated section.

Make a 4 finger bubble followed by a 4 finger fold twist.
Then make two 2 finger bubbles and twist the balloon around
the 4 finger fold twist to hold it in place.

Then two more 2 finger bubbles.
Twist the balloon around the base of the 4 finger fold twist and push the two
2 finger bubbles into the 4 finger fold twist to make the second ear.

Make another r4 finger fold twist for the lower section of the face and twist
the knot of the balloon around this twist.

Hopefully you have between a 7/9 finger bubble left on the black balloon that
later will go over the top centre bubbles between the ears.

You then need the second 3 finger fold twist for the second cheek.

Then two 4 finger bubbles for the eyes of Mickey,
twist the balloon around the centre of the two cheeks and discard the rest od the blush 260.

Take the black 260 and wrap this around the centre of the blush balloon.

On mine I did not have to let an air out of the balloon,
sometimes you do. There should be a 2 finger bubble in the black 260 to
help hold the mouth, cheeks, eyes etc all correctly and in alignment.

Inflate the red 260 leaving 6 fingers un-inflated, I make a 2 finger bubble.
This will be the tongue for the mouth of Mickey.

Then twist a soft 4/5 finger bubble will act like a neck.
This has to be soft as you do want to shock twist shape this
so the head sits nicely on the wand section of the design.

If you want a shorter wand make the fold twist 4 finger bubbles
or for a longer wand make the fold twists 3 fingers.

Push the knot from the red 260 down into the blush 4 finger fold twist.

The nose is a 2 or 3 finger bubble tied softly to make roundish.
If too tight it will look like a pinch twist.

Depending on the number and size of the fold twists in
the red 260 will vary the length of the wand being used.