Balloon Chat

Uncategorized Boards => Model Of The Month => Topic started by: Graham Lee on May 12, 2017, 03:27:39 PM

Title: Model of the Month (Horse)
Post by: Graham Lee on May 12, 2017, 03:27:39 PM
I'm just working out the next model of the month for June,
at the moment either the horse or the two balloon sausage dog.
Title: Re: Model of the Month
Post by: Graham Lee on May 12, 2017, 03:28:58 PM
The two white horses are slightly different in design.
Working out what goes together best and sits nicely.
Title: Re: Model of the Month
Post by: Graham Lee on May 16, 2017, 09:13:03 AM
Playing with the horse design.
Title: June Competition (Horse/Pony)
Post by: Graham Lee on May 27, 2017, 12:29:26 PM
This months challenge is going to be the Horse/Pony design we have been playing about with.
Title: Re: June Competition (Horse/Pony)
Post by: Graham Lee on May 29, 2017, 06:09:35 PM
Some variations I made today.
Title: Re: June Competition (Horse/Pony)
Post by: Graham Lee on May 29, 2017, 06:10:22 PM
I changed the eyes, the wild berry eyes looked a little scary to me.
Title: Re: June Competition (Horse/Pony)
Post by: Graham Lee on May 29, 2017, 06:12:45 PM
I will put the instructions up soon.
This is what will come in the complimentary packs with all balloon orders for June.
If you make the design and post it then you will be entered into the draw to win a balloon modelling DVD.

If you do not purchase from us then no problem, please join in for fun.
It's always nice to see some variations on a theme.
Title: Re: June Competition (Horse/Pony)
Post by: Graham Lee on May 31, 2017, 09:10:31 AM
Here come the instructions for the horse/pony. It would not take much to make the design a unicorn as well.

So inflate the white 260 leaving approx. 6 fingers un-inflated.
Twist a 2 finger and a 2.5 finger bubble and make into two pinch twists.
I have the larger bubble as the lower mouth section.

Then twist a 4 finger bubble and a 1.5 finger pinch twist.
Title: Re: June Competition (Horse/Pony)
Post by: Graham Lee on May 31, 2017, 09:12:01 AM
Make another 4 finger bubble and twist into the mouth section
followed by a 5 finger bubble back to the 1.5 finger pinch twist.

Then make a 5 finger bubble for the neck of the horse and then a two 2 finger pinch twist.
Title: Re: June Competition (Horse/Pony)
Post by: Graham Lee on May 31, 2017, 09:15:12 AM
Then make the second 2 finger pinch twist.
The last section of the white 260 should be a 5 finger bubble for the first leg.

Inflate the Caribbean Blue 240 for the feet, only inflate about half as you will not use all the balloon.
Make a 3 finger fold twist followed by a 1.5 finger pinch twist.
Title: Re: June Competition (Horse/Pony)
Post by: Graham Lee on May 31, 2017, 09:17:06 AM
Then three more 3 finger fold twists for the feet of the horse.

Attach the 5 finger leg bubble into the fold twist from the first balloon.

Inflate the next 260 white leaving 6 fingers un-inflated and attach into the fold twists.
Title: Re: June Competition (Horse/Pony)
Post by: Graham Lee on May 31, 2017, 09:19:13 AM
Make a 5 finger bubble and twist into the two pinch twists.
Then make another 5 finger bubble for the body and a 1.5 finger pinch twist.
The tail and rear legs will attach around this pinch twist.

Make another 5 finger bubble for one of the rear legs and twist this around the four fold twists.
Title: Re: June Competition (Horse/Pony)
Post by: Graham Lee on May 31, 2017, 09:22:00 AM
Then the last leg is another 5 finger bubble twisted into the rear pinch twist
and then another 5 finger body bubble twisted into the two front pinch twists.

I then make a 4 finger and 1 finger bubble for the last body bubble.
For me this makes the body shape down slightly at the back.
(You could just have another 5 finger bubble)
Title: Re: June Competition (Horse/Pony)
Post by: Graham Lee on May 31, 2017, 09:25:28 AM
The 4 finger and 1 finger bubbles and pushed into the centre of the top body bubbles.

Inflate the white 160 leaving 6 fingers un-inflated, attach this to the front two pinch twists.
Make three bubbles to fit up the side of the neck so approx. 1.5 finger sections.

You then need to make an ear, I made a 4 finger and 2.5 finger bubble.
This could be smaller or bigger depending on what you prefer.
In grey bigger as the design could then be a donkey.
Title: Re: June Competition (Horse/Pony)
Post by: Graham Lee on May 31, 2017, 09:27:54 AM
Twist the ear bubbles around the pinch twist and then twist another 4 and 2.5 finger bubble for the other ear.
Attach around the same pinch twist.

Make 3 more approx. 1.5 finger bubbles for down the horses neck and twist into the pinch twists.

You then need a 5 finger bubble twisted into the rear pinch twist.
Title: Re: June Competition (Horse/Pony)
Post by: Graham Lee on May 31, 2017, 09:32:05 AM
I then twist the 160 a few times around the pinch twist and break off but not deflating.
Push the air to the end of the 160 and make approx. a 4/5 finger bubble for the tail
of the horse and twist this into the pinch twist,
you could tie both of the ends of the 160 back up hers for safety.

This leaves the clean look to the end of the 160 so not having a knot at the end.

Inflate the 160 Caribbean blue to about half way, you are not using all the balloon for this.

Make between a 4/5 finger bubble,
this does depend on the size of the two pinch twists you made for the mouth.

Then a 1 finger pinch twist and a 3/4 finger bubble and another 1 finger pinch twist.
Title: Re: June Competition (Horse/Pony)
Post by: Graham Lee on May 31, 2017, 09:36:22 AM
Wrap this balloon around the mouth of the horse and tie in the knot of the balloon around a pinch twist.

Depending where you are going to have the reins around the neck and how low looking
you want the face of the horse depends on the next two bubble sizes.
Anything from 6 finger to 8 finger bubbles will work,
it depends on how you would like the look of your horse to be, decisions, decisions.
This balloon modelling can be very stressful  ;)

Attach the second bubble around the neck and onto the other pinch twist of the rein.
Title: Re: June Competition (Horse/Pony)
Post by: Graham Lee on May 31, 2017, 09:38:01 AM
This is how the reins on mine look.
The remainder of the Caribbean Blue 160 I use for the eyes.
Make a 3 finger bubble, split into two and make two 1.5 finger pinch twists.
Insert these into the head section.
Title: Re: June Competition (Horse/Pony)
Post by: Graham Lee on May 31, 2017, 09:40:01 AM
A couple of ways the reins could fit, it's decision time..................good luck!

If you have a look at the variations at the beginning of this thread
as changing the colours of the design does make a difference to the look.
It could look a little my little pony if required.
Title: Re: June Competition (Horse/Pony)
Post by: Graham Lee on May 31, 2017, 09:48:14 AM
I also made a variation a few weeks back.

You can see in this picture how the back of the body looks bigger by
having the last body bubble a 4 and a 1 finger bubble.
Title: Re: June Competition (Horse/Pony)
Post by: Kenny on May 31, 2017, 11:33:12 AM
Hi ho very nice horse :D
Title: Model of the Month
Post by: Laurasfaces on June 16, 2017, 06:13:38 PM
(//https://uploads.tapatalk-cdn.com/20170616/eeaf2d74cf0607fbab589b4f35906ed2.jpg)


I found this a challenge but loved it :)


Sent from my iPhone using Tapatalk
Title: Re: June Competition (Horse/Pony)
Post by: claish on June 20, 2017, 09:07:24 AM
I made my horse into a unicorn candy cup
Title: Re: June Competition (Horse/Pony)
Post by: Graham Lee on June 29, 2017, 07:38:30 PM
Closing date for this months competition is the 7th July with the winner picked on the 8th.
Title: Re: June Competition (Horse/Pony)
Post by: Graham Lee on July 07, 2017, 04:13:01 PM
Today is the last day to enter the competition,
I think we only have two entries at the moment so a good chance to win a DVD.
Title: Re: June Competition (Horse/Pony)
Post by: KatGirl on July 07, 2017, 05:56:45 PM
That's enough horsing around for one week.
Title: Re: June Competition (Horse/Pony)
Post by: lowemagic on July 07, 2017, 09:42:20 PM
This is one I made earlier
Title: Re: June Competition (Horse/Pony)
Post by: Graham Lee on July 08, 2017, 08:50:14 AM
Thanks to those that entered for the competition this month.
I just done the random name selector via google and the winner is Katgirl.

Congrats, off to find the list that you can choose from.

This is the list,
 
Exotic birds and sea creatures, Simply Shonna
Blossoms, Guido & Dennis
Doves Angel, Maryline Fossey

CD, A little bit more, Thelma Levett
CD, Twisted Mind, Hans Siemons

Books

Captain Visual's one balloon book
Captain Visual's Air Heads and Heart Breakers
Mr Rainbows Mother Goofs, silly ditties

Mother Goofs Nursery Rhymes, Mr Rainbow
More Marvelous Miniatures, Linda Berman
Title: Re: June Competition (Horse/Pony)
Post by: KatGirl on July 08, 2017, 06:48:37 PM
OooooooOOOoooooh! Thank you Graham!!!!

I'm not sure what to choose! Is the blossom dvd about geoblossoms? I need some more ideas for those :)

Thanks again!!